Accessories

Self-closing quick disconnect for ball lock cornelius kegs. Black coupling that fits on the liquid post. Threads: 1/4" MFL (corresponds to 7/16" UNF).

Self-closing quick disconnect for ball lock cornelius kegs. White/grey coupling that fits on the gas post. Threads: 1/4" MFL (corresponds to 7/16" UNF).

Self-closing quick disconnect for ball lock cornelius kegs. Black coupling that fits on the liquid post. Barb: 6.5 mm (1/4"). The gas line should be secured with a hose clamp.

Self-closing quick disconnect for ball lock cornelius kegs. Whte/Grey coupling that fits on the gas post. Barb: 6.5 mm (1/4"). The gas line should be secured with a hose clamp.

Ball lock disconnect with integrated Duotight 9,5mm (3/8") quick coupling. Ingenious ball coupling from kegland means you don't have to choose between hose clamp or quick coupling with threads. Now there is finally a ball coupling in really good plastic material that better resists chemicals and has a built-in quick coupling.

Ball coupling with integrated Duotight 8mm (5/16") quick coupling. Ingenious ball coupling from kegland means you don't have to choose between hose clamp or quick coupling with threads. Now there is finally a ball coupling in really good plastic material that better resists chemicals and has a built-in quick coupling.

Ball coupling with integrated Duotight 8mm (5/16") quick coupling. Ingenious ball coupling from kegland means you don't have to choose between hose clamp or quick coupling with threads. Now there is finally a ball coupling in really good plastic material that better resists chemicals and has a built-in quick coupling. For hoses with 8mm outer diameter.

Ball lock connector with Flow Control, to adjust resistance easily without the introduction of turbulence which creates foam. With Duotight 8 mm (5/16"). For liquid/beer.

You can now have a check valve integrated into your ball lock disconnect. These clear/grey high quality plastic disconnects are very common in the industry but now have the added feature of having a check valve integrated into the fitting. The internal parts are made from stainless steel and the body is clear so you can see whats inside.With the MFL thread you can attach: - Barb fitting (Swivel Nut & Barb)- 8mm push in fitting- Mini All In One Regulator- Premium Mini Regulator

If you want an easy way to balance your beer lines this is the way to do it.  Please be aware that even in the fully open position these FC disconnects do have some inherent flow resistance so you should use either shorter line or larger ID line that you would when compared with traditional ball lock disconnects.  One of the benefits of FC disconnects is you don't need to rely on the small ID or line length to apply flow resistance so it would not make sense to use long lines or small ID lines as well as this is the job of the FC device.This is perfect for people who want to serve a large range of beverages with differing carbonation levels as it gives you the ability to adjust resistance easily.This stainless steel ball lock disconnect is quality machined from stainless steel with MFL thread.  It's ideally used with duotight MFL fittings.

Gas distributor 2 outputs 1/4 nipple. Perfect when you build a kegerator and want to be able to have several barrels on the same carbon dioxide tube and then also have the option to turn off or on the gas to each barrel.

Gas distributor 3 outputs 1/4 nipple. Perfect when you build a kegerator and want to be able to have several barrels on the same carbon dioxide tube and then also have the option to turn off or on the gas to each barrel.

Gas distributor 4 outputs 1/4 nipple. Perfect when you build a kegerator and want to be able to have several barrels on the same carbon dioxide tube and then also have the option to turn off or on the gas to each barrel.

Gas distributor C421 2-way 3/8 barbed (ca 10mm). Aluminium. Perfect when you build a kegerator and want to be able to have several barrels on the same carbon dioxide tube and then also have the option to turn off or on the gas to each barrel.

Gas distributor 4-way 3/8" barbed (10mm). Aluminium. Perfect when you build a kegerator and want to be able to have several barrels on the same carbon dioxide tube and then also have the option to turn off or on the gas to each barrel.

Fluidfit® HCF-UNF push-fit connection connection with female 1/4" thread UNF - connector adaptor. For 3/8" hose. N1/4" and 3/8" pushfit.

PE-tubing is perfect for handeling gas & liquids. It's pretty much considered a standard in the business of dispensing all types of beverages. Choose color and dimensions in the drop down menu: 1pc = 1 meter

Polyethylene (LDPE) restrictor tubing with inside diameter 1/8" (3.2 mm) and outside diameter 3/16" (4.8 mm). Provides additional pressure drop to prevent excess foaming.Price per meter.

Isolation Jacket for Cornelius Keg 18-23L. Neoprene.Note: Cornelius keg is not included.

Hop filter in stainless steel, perfect for dry hopping beer in Cornelius kegs or fermenters. Loop for hanging it. Length: 29cm. Diameter: 7cm.

Rubber seal for Trapets Adaptor (type 2.3)

This trapets adapter in nickel plated brass allows you to attach 425 g aluminum CO2 cylinders to a CO2 regulator with standard W21.8x1/14" threads.Version 2.3 features a spring pressure screw, that makes it no longer necessary to make adjustments for different brands of CO2 cylinders in most cases.Comes equipped with a safety vent hole to minimize the risk of damaging the gasket when unscrewing it from the CO2 cylinder with remaining pressure.Made in Sweden.

Brass trapetz adapter for 425g co2 flasks, for example Sodastream.

Fits CO2/Beer Ball-lock-coupling. Sanitize hoses or force carbonate beer on PET Bottle. Also fits FermZilla. Clean your beer line easy. Attach the cap to a soda bottle with cleaning solution. Liquid and Gas ball lock compatible. Stainless steel.

This pressure kit is so you can convert the 29 and 58L Kegmenters into either pressure rated fermenters or use the Kegmenters as ball lock kegs. This lid comes with a red pressure relief valve (that opens at 2.5bar - compatible thread to cornelius type PRVs). The lid has accurately machined gas and liquid posts.This lid is ideally suited to also fermenting under pressure so you can use a spunding valve/adjustable pressure relief valve so you can naturally carbonate during primary fermentation.It should be noted that we now make this lid with a 60cm silicon dip tube with a stainless fload. This innovative design means when you draw liquid from this kegmenter the liquid will always be drawn from the top 2.5cm of liquid meaning only the clearest wort/beer will be drawn from the kegmenter. This is particulrly useful if you are dispending directly from the fermenter or simply want to separate clear liquid from sediment which has sunken to the bottom of the kegmenter.

Standard lid for cornelius kegs.

Relief Valve that fits the lids of Cornelius kegs. Gasket included.

O-ring for Cornelius Keg Valves. 1pc.

Silicone O-ring for Cornelius Keg Valves. 1pc. ID10.84XC/S2.71mm

Cornelius Keg Silicone Gasket Set, includes: 1 big o-ring for lid, 2 small o-rings for posts, 2 small orings for the pipe.

O-ring for Cornelius Keg Lid

Dip Tube for Cornelius keg 18/19L for liquid/beer (bent). Stainless steel.

Dip Tube for Cornelius keg 9L for liquid/beer (bent). Stainless steel.

Dip Tube Gas for Cornelius keg 9/12/18/19L (straight). Stainless steel.

Spring for relief valve for Cornelius keg

Sturdy, but elegant metal CO2 beer dispensing tap for 5-liter mini kegs. One 16 gram CO2 cartidge is used for each keg. The CO2 replaces the beer tapped from the keg and protects against oxidation until the keg is consumed.CO2 cartridges sold seperately.

Adapter for 8g CO2 cartridge for siphons

Rubber stopper with center plug for five-liter mini Party kegs. Grey. Can be reused. UsageWhen you insert the stopper in the keg, push down around the outer edge. If you push down on the center plug, it may fall into the keg. When it's time to start serving beer, push the dip tube of the dispenser through the rubber stopper. The dip tube seals against the rubber stopper and the center plug falls into the keg.

Rubber stopper with center plug and 2,5-bar pressure relief valve for 5-liter mini Party kegs. Grey. Can be reused.UsageThe pressure relief valve opens automatically if the pressure exceeds about 2.5 bar, to protect the keg from too high pressure which might otherwise occur during keg conditioning / priming.When you insert the stopper in the keg, push down around the outer edge.If you push down on the center plug, it may fall into the keg.When it's time to start serving beer, push the dip tube of the dispenser through the rubber stopper. The dip tube seals against the rubber stopper and the center plug falls into the keg.

Rubber valve plug Red-Black for 5L Party kegs (mini kegs) with an integrated faucet. Made for single use. May be opened to allow air into the keg, so the beer will pour when the faucet is opened.

Cooling jacket for Party keg 5 liter. Put in the freezer and when it's time you put the jacket over the keg and thus keep it colder for longer during trips, transport or when the keg is in front of you for serving.

Drip tray for Party Keg 5L, black plastic.

Better Brew S30 Adapter for 8g CO2 cartridge

Kegland Oxygen Flow Meter with 8mm Duotight. Pure oxygen is the best way to get your yeast off to a cracking start. Simply use this high pressure and high capacity disposable tank to boost dissolved oxygen levels in your cooled wort.Oxygen is great for use with high gravity beers or pilsners where you are trying to build up a large population of yeast.We would recommend the use of a diffusion stone. These small diffusion stones create very fine bubbles of oxygen in your wort and help the oxygen to dissolve into solution faster. If you want a really nice optoin we would recommend the use of this oxygenation wand and this is a bit more erganomic as you have a rigid stainless tube to force the stone to the bottom of the fermenter rater than it floating to the surface.This flow control device is designed to be used with our oxygen cylinder and regulator that can be purchased separately.InstructionsAttach the regulator to to the top of your disposable cylinder. Turn pressure up to 1-10psi. Immerse diffusion stone in wort for 1-2 minutes. Then dial the flow meter up to 1.0L/min. The time it takes to saturate will depend on volume, temperature, depth of vessel, and type of stone (0.5mm recommended)NOTE: Wort must be cold. It is extremely difficult to get oxygen to dissolve into hot wort so it's essential to cool wort completely before starting this process.

Fluidfit® HCF-UNF push-fit connection connection with female 7/16" thread UNF - connector adaptor for threaded ball disconnects. For 3/8" hose. UNF 7/16" and 3/8" pushfit.

Fits CO2/Beer Ball-lock-coupling and has 1/4" (6,5mm) stem. Sanitize hoses or force carbonate beer on PET Bottle. Also fits FermZilla. Clean your beer line easy. Attach the cap to a soda bottle with cleaning solution. Liquid and Gas ball lock compatible. Red plastic.

Fits CO2/Beer Ball-lock-coupling and has 1/4" (6,5mm) straight stem. Sanitize hoses or force carbonate beer on PET Bottle. Also fits FermZilla. Clean your beer line easy. Attach the cap to a soda bottle with cleaning solution. Liquid and Gas ball lock compatible. Yellow plastic.